Wireless Access

Reply
Frequent Contributor I

Same mobile device to different SSID has different speed (Same AP)

I have problem with same windows mobile device connect to different SSID has different speed with same Aruba AP. Example: SSID A is authenticate through 802.1x with Microsoft NPS and SSID B is authenticate through WAP2. 

 

For SSID A, most of the device to connect to it was on "Client PHY a" with speed of 54Mbps. But when connect to SSID B "Client PHY is n 40Mhz" with the speed of 300MB, it was from same location.

 

I did try to connect it to SSID A with the windows mobile device without join the domain the speed is 300 Mbps and "Client PHY is n 40MHz".

 

Please advise. what is the problem as above?

Re: Same mobile device to different SSID has different speed (Same AP)

What are the data rates configured for each SSID? These can be set on a per SSID basis.

 

#show wlan SSID profile XXXX


ACMA, ACMP, ACSA
If my post addresses your query, give kudos:)
Frequent Contributor I

Re: Same mobile device to different SSID has different speed (Same AP)

For SSID A data rate is 270 mbps or above and SSID B is 54 Mbps or below.

Guru Elite

Re: Same mobile device to different SSID has different speed (Same AP)

If you are using WEP or anything with TKIP, the fastest speed is 54.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: