I am trying to setup a second Virtual AP with internet access that is isolated from the default ap and guest ap. I have one setup but it has no internet access.
VLAN 1 is my default, VLAN 900 is the guest, and VLAN 2 is the new one.
VLAN ID IPv4 Address IPv4 Net Mask IPv6 Address Associated Ports AAA Profile Admin State Operation State Mode
1 | 10.250.250.200 | 255.255.0.0 | fe80::b:8600:16d:ff58 | GE1/0-3,Pc0-7 | N/A | Enabled | Up | Regular | |
2 | 172.16.0.1 | 255.255.252.0 | fe80::b:8600:26d:ff58 | | N/A | Enabled | Up | Regular | |
900 | 192.168.200.1 | 255.255.252.0 | fe80::b:8603:846d:ff58 | | N/A | Enabled | Up | Regular | |
Default Router 10.250.250.200
DNS Servers 10.250.250.66 10.250.250.67
Network IP Address 10.250.200.0 Net Mask 255.255.248.0
Default Router 192.168.200.1
DNS Servers 208.67.222.222 208.67.222.220
Network IP Address 192.168.200.0 Net Mask 255.255.252.0
Default Router 172.16.0.1
DNS Servers 208.67.222.222 208.67.222.220
Network IP Address 172.16.0.0 Net Mask 255.255.252.0
What am I doing wrong? Is there a better way to isolate these devices?