Wireless Access

Reply
MVP
Posts: 289
Registered: ‎11-04-2008

Should all APs in the same mobility domain be populated at the Master?

[ Edited ]

Hello all,

 

My mobility domain comprise of 3600 AOS 6.1.3.2 master and many local controllers that connect to the master via layer 2, Metro E, and MPLS.  They all work well, “show ap database” at the master will show all of the APs in the mobility domain; “show global-user-table list” at the master will display all wireless users.

 

I moved few controllers recently to a different subnet, so they will connect to the master via layer 3 with a router between them.  Everything seems to work normal,  at the master controller: “show switches” displays all controllers;  “show global-user-table list” displays all clients; but “show ap database” is no longer including the APs at the local controllers that associate to the master controllers via layer 3.

 

Normal behavior or am I missing something in the configuration?

 

Regards,

Trinh Nguyen

 

~Trinh Nguyen~
Boys Town
Guru Elite
Posts: 21,269
Registered: ‎03-29-2007

Re: Should all APs in the same mobility domain be populated at the Master?

I would upgrade to 6.1.3.5.  There was an issue with the master controller not displaying all of the access points at locals.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

MVP
Posts: 289
Registered: ‎11-04-2008

Re: Should all APs in the same mobility domain be populated at the Master?

I'll schedule the upgrade and post the result

~Trinh Nguyen~
Boys Town
MVP
Posts: 289
Registered: ‎11-04-2008

Re: Should all APs in the same mobility domain be populated at the Master?

Confirm!  AOS 6.1.3.5 works!  All APs from the local populated at the master

~Trinh Nguyen~
Boys Town
Search Airheads
Showing results for 
Search instead for 
Did you mean: