Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Show VPN user in the Web Interface?

This thread has been viewed 3 times

  • 1.  Show VPN user in the Web Interface?

    Posted May 19, 2017 02:00 PM

    I know currently that the only way to see VPN users is via the SHOW USER-TABLE command in the CLI environment. Does anyone know if there are plans to add this to the GUI interface with the other users? I, for one, would find it very valuable to see connected VPN users on the Clients tab of the controller Dashboard.

     

    Anyway, just asking :-)

     

     



  • 2.  RE: Show VPN user in the Web Interface?

    Posted May 20, 2017 03:45 AM
    I'm sure I've always been able to see VIA VPN users in the GUI. Are these VIA VPN users?


  • 3.  RE: Show VPN user in the Web Interface?

    Posted May 22, 2017 08:19 AM
    @jrwhitehead wrote:
    I'm sure I've always been able to see VIA VPN users in the GUI. Are these VIA VPN users?

    Yes - VIA VPN users, they do not show up under the clients tab of the dashboard on the controller but they do on a cli inquiry (SHOW USER-TABLE)

     

    vpn user.JPG

    I am running a 7010US on 6.5.0.3 code. If it is a simple configuration issue, I would love to know what it is :-) but I had the same issue on a 7210 and an older 3200XM.