Wireless Access

Reply
Frequent Contributor II
Posts: 250
Registered: ‎09-14-2011

Show VPN user in the Web Interface?

I know currently that the only way to see VPN users is via the SHOW USER-TABLE command in the CLI environment. Does anyone know if there are plans to add this to the GUI interface with the other users? I, for one, would find it very valuable to see connected VPN users on the Clients tab of the controller Dashboard.

 

Anyway, just asking :-)

 

 

Scott McNeil - IT Specialist, Global Process Automation
Network+ | CWNA | CWTS | ACSP | ACMP | ACMA | BREC
MVP
Posts: 992
Registered: ‎04-13-2009

Re: Show VPN user in the Web Interface?

I'm sure I've always been able to see VIA VPN users in the GUI. Are these VIA VPN users?
Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Frequent Contributor II
Posts: 250
Registered: ‎09-14-2011

Re: Show VPN user in the Web Interface?


jrwhitehead wrote:
I'm sure I've always been able to see VIA VPN users in the GUI. Are these VIA VPN users?

Yes - VIA VPN users, they do not show up under the clients tab of the dashboard on the controller but they do on a cli inquiry (SHOW USER-TABLE)

 

vpn user.JPG

I am running a 7010US on 6.5.0.3 code. If it is a simple configuration issue, I would love to know what it is :-) but I had the same issue on a 7210 and an older 3200XM. 

 

 

Scott McNeil - IT Specialist, Global Process Automation
Network+ | CWNA | CWTS | ACSP | ACMP | ACMA | BREC
Search Airheads
Showing results for 
Search instead for 
Did you mean: