Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎11-23-2011

Simultaneous Telnet connections to my Aruba Mobility Controller

Hi !

 

I would like to increase the number of simultaneous Telnet connections allowed to my Aruba Mobility Controller : ArubaOS 5.0.3.3

User concerned is "admin" with "root" role.

 

Any idea how i can do that ?

 

Thanks for all and best reagards,

Guru Elite
Posts: 21,029
Registered: ‎03-29-2007

Re: Simultaneous Telnet connections to my Aruba Mobility Controller

[ Edited ]

That cannot be increased, unfortunately.

 

You can type "show loginsession" to see who is currently logged in.  You can also type, from the console "clear loginsession <x>" to disconnect that user, but only when you are connected to the physical console.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 2
Registered: ‎11-23-2011

Re: Simultaneous Telnet connections to my Aruba Mobility Controller

[ Edited ]

well...ok...

Do you know what is, officially, the max simultaneous connections allowed on telnet port, by default ?

 

In my tests it seems this is 4-5-6...not really sure...

 

Note Answer : i've improved my script : this is 5 simultaneous telnet connections.

 

Regards

Aruba Employee
Posts: 49
Registered: ‎04-02-2007

Re: Simultaneous Telnet connections to my Aruba Mobility Controller

5 is the max number of concurrent telnet session.  Keep in mind to set the "loginsession timeout" to a reasonable time.

 

In other words, if you set the loginsession timeout to 0 (infinite) and then you inadvertently close the ssh session abruptly, you may put yourself in a bind ..

Search Airheads
Showing results for 
Search instead for 
Did you mean: