Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Slave settings not updating correctly from master controller

This thread has been viewed 0 times

  • 1.  Slave settings not updating correctly from master controller

    Posted Sep 13, 2013 09:46 AM

    Hello,

     

    Long story short, I had to change my RADIUS shared secret on my NPS server recently, and when I update the secret on my master controller, it never changes on the second controller. Users trying to authenticate through this controller to the RADIUS server are denied access because the RADIUS secret is incorrect. Anyone know how I can change this on the slave controller? The options are all greyed out when I view the RADIUS server settings.

     

    Thanks!



  • 2.  RE: Slave settings not updating correctly from master controller

    Posted Sep 13, 2013 09:59 AM

    Assuming the controllers are talking to one another, when you click Save Configuration, it will push the change to all the local controllers.

     

    If you did this already, run show switches to see if the local is visible.



  • 3.  RE: Slave settings not updating correctly from master controller

    Posted Sep 13, 2013 10:08 AM

    Save Configuration worked perfectly.... thank you very much.