08-18-2014 03:54 AM
I have issue with Spectralink phones which are been implemented in Aruba enviroment.
I would like to understand the QoS configuration on Aruba controller for specific Voice traffic ( Specific VAP ,SSID )
Could you please guide me with show commands on controller to verifiy if QoS is enabled ?
how to proceed for troubleshooting in Controller ? I have autoqos configured on my core switch 3750 .
Let me additional details to check from LAN side as well.
08-18-2014 05:25 AM
I would firstly check out the Validated Ref Guide:
What appears to be the issue with the phones?
Are you running a controller or IAP?
08-18-2014 05:31 AM
This should get you started:
08-18-2014 07:02 AM
08-19-2014 12:42 AM
I came across some of the commands which are helpful to check the QoS :
1) show wlan ssid-profile <profile name >
which will show the output with WMM details whether it is enabled or disabled.
a) DSCP mapping for WMM voice AC
b) DSCP mapping for WMM video AC
2) show profile-list qos-profile
to check if there is profile configured
3) show wlan wmm-traffic-management-profile
to see see Traffic Management Profile that allocates all of the bandwidth tracked by bandwidth control to the virtual AP profile defined for voice
4) show wlan voip-cac-profile
Please do comment of this and let me know additionally what do i check in controller from client perspective or QoS perspective....