Wireless Access

Reply
Frequent Contributor II
Posts: 113
Registered: ‎11-27-2012

Specify Outer GRE-tunnel DSCP priority

Hi.

Is it possible in any way to specify the DSCP value for the GRE packets going from the AP to the Controller?

In this case I do not need to set the DSCP value for the traffic inside the tunnel, but the DSCP for the tunnel itself.

-----------------------------------
-ACMX #352-
Remember to Kudo if a post helped you! || Problem Solved? Click "Accept as Solution" in a post!
MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: Specify Outer GRE-tunnel DSCP priority

 

Under the AP-System Profile

 

All Profile Management_2013-09-16_09-41-53.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Guru Elite
Posts: 20,821
Registered: ‎03-29-2007

Re: Specify Outer GRE-tunnel DSCP priority

[ Edited ]

That parameter ONLY sets the DSCP for heartbeats between the access point and the controller, not the data in the GRE tunnel.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor II
Posts: 113
Registered: ‎11-27-2012

Re: Specify Outer GRE-tunnel DSCP priority

Thank you victorfabian, but that setting does not solve my issue.

As cjoseph points out, that setting does nothing with the GRE data, only the GRE heartbeats.

 

-----------------------------------
-ACMX #352-
Remember to Kudo if a post helped you! || Problem Solved? Click "Accept as Solution" in a post!
MVP
Posts: 1,110
Registered: ‎10-11-2011

Re: Specify Outer GRE-tunnel DSCP priority

The AP should take the DSCP value in the packet from the client and slap that on the GRE packets.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Search Airheads
Showing results for 
Search instead for 
Did you mean: