Wireless Access

Reply
Frequent Contributor II
Posts: 114
Registered: ‎05-31-2015

Spectrum analysis commands

Some of the spectrum analysis commands run on a remote AP save the file with the output -

Printing 60 lines to file(s) in /tmp/spectrum directory on the AP

How can I access these files?

I'm running this command on a controller running 6.1.3.5 code.

MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: Spectrum analysis commands

If you configure a tftp dump server this information will transfer to that server after your run the command.

http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-do-I-retrieve-a-core-dump-from-an-AP-in-the-event-of-a/ta-p/180550 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Frequent Contributor II
Posts: 114
Registered: ‎05-31-2015

Re: Spectrum analysis commands

I have configured the dump server but no files arrive at the server when I run the commands. I know the server is reachable because it responds to pings and I can transfer a file from the controller manually using the copy command.

Frequent Contributor II
Posts: 114
Registered: ‎05-31-2015

Re: Spectrum analysis commands

Sorry, it seems that only some of the commands have produced an output as I've run a couple more, one of which has resulted in a file being transferred successfully.

Search Airheads
Showing results for 
Search instead for 
Did you mean: