Wireless Access

last person joined: 17 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Split Tunnel Mode VLAN on Captive Portal

This thread has been viewed 5 times

  • 1.  Split Tunnel Mode VLAN on Captive Portal

    Posted Feb 23, 2017 05:00 AM

    I had configured Remote AP, and used the Split Tunnel mode on the Captive-Portal SSID, It works with VLAN that attached with the Controller, and I have some questions. Can I use the VLAN on the remote site?



  • 2.  RE: Split Tunnel Mode VLAN on Captive Portal

    Posted Feb 23, 2017 05:02 AM
    What do you a vlan on the remote site?

    Get Outlook for iOS


  • 3.  RE: Split Tunnel Mode VLAN on Captive Portal

    Posted Feb 23, 2017 05:21 AM

    I place the RAP on the Branch

     

    Controller ---- WAN Link ---- RAP (Remote Site, Branch)

     

    Controller's VLAN : 10,20,30

    Branch's VLAN : 40 

    -------

    SSID : Captive-Portal-SSID (VLAN10) 

     

    and is it possible to change the VLAN Captive-Portal-SSID to VLAN40?



  • 4.  RE: Split Tunnel Mode VLAN on Captive Portal

    Posted Feb 23, 2017 05:24 AM
    Not possible to do that.

    Get Outlook for iOS


  • 5.  RE: Split Tunnel Mode VLAN on Captive Portal

    Posted Feb 23, 2017 05:32 AM

    Is it works only with the VLAN on controller?



  • 6.  RE: Split Tunnel Mode VLAN on Captive Portal

    Posted Feb 23, 2017 05:36 AM
    Correct

    Get Outlook for iOS


  • 7.  RE: Split Tunnel Mode VLAN on Captive Portal

    Posted Feb 23, 2017 05:36 AM
    Correct

    Get Outlook for iOS


  • 8.  RE: Split Tunnel Mode VLAN on Captive Portal

    Posted Feb 23, 2017 05:02 AM
    What do you a vlan on the remote site?

    Get Outlook for iOS