08-06-2014 07:13 AM
I found the following note in the documentation:
Understanding DHCPv6 Passthrough/Relay The switch forwards DHCPv6 requests from IPv6 clients to the external IPv6 router. On the external IPv6 router, you must configure the switch’s IP address as the DHCP relay. You do not need to configure an IP helper address on the switch to forward DHCPv6 requests.
Is there a plan to support (full) DHCPv6-Relay and DHCPv6-Snooping? If yes, when?
Thanks a lot,
My Homepage: http://dokuwiki.alu4u.com