Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Third Party Firewall between 2 controllers

This thread has been viewed 0 times

  • 1.  Third Party Firewall between 2 controllers

    Posted Dec 19, 2015 09:10 AM

    Hi,

    i want to configure an IPSec VPN between 2 controlleurs , and i have a small issue.

    between the two controllers i have a Sophos Firewall that do not support IKEv2 , so i need to nat ports to permit the communication between the two device.

    first , is it possible to do it ?

    then , what are the port that I must nat ?

    Regards



  • 2.  RE: Third Party Firewall between 2 controllers

    EMPLOYEE
    Posted Dec 19, 2015 09:12 AM
    If it is ipsec and you have "enforce NAT T" (recommended) on the connection you only need UDP 4500.


  • 3.  RE: Third Party Firewall between 2 controllers

    Posted Dec 19, 2015 09:28 AM

    do any one have a tuto for a VPN site to site configuration



  • 4.  RE: Third Party Firewall between 2 controllers

    EMPLOYEE


  • 5.  RE: Third Party Firewall between 2 controllers

    Posted Dec 19, 2015 09:51 AM

    and what about IKE port (500)



  • 6.  RE: Third Party Firewall between 2 controllers

    EMPLOYEE
    Posted Dec 19, 2015 09:53 AM
    If you use enforce NAT T, you don't need that.