Wireless Access

Reply
Occasional Contributor I
Posts: 7
Registered: ‎07-09-2015

Trying to Create new Firewall Policy

I am learning how to install a RAP and am using the VRD for that. I am to the section where I need to add a Firewall Policy using the GUI and am stuck. I go to the Configuration tab, Security > Access Control > Policies. I select ADD to add a new policy, type in the name and select SESSION as the policy type. But there is no ADD button to add rules, and there is no save button to create the policy. OS version is 6.4.2.5. I am sure I am missing something, just not sure what it is.

 

Thanks - John

Guru Elite
Posts: 21,016
Registered: ‎03-29-2007

Re: Trying to Create new Firewall Policy

Screenshot?

I am assuming that you have the Policy Enforcement Firewall installed?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite
Posts: 8,456
Registered: ‎09-08-2010

Re: Trying to Create new Firewall Policy

Is this a multi-controller environment? If so, be sure you're on the master.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: Trying to Create new Firewall Policy

Are you doing it from the Master controller or Local controller ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 7
Registered: ‎07-09-2015

Re: Trying to Create new Firewall Policy

Thanks Colin Joseph! No need for a screen shot as you hit the nail on the head. While I do have PEF, I had not yet installed the license. Once I did that I am now able to add the necessary policies. And to the others, thank you as well. Yes, I am working on the master controller.

 

On to the next issue. I am sure I will be back, so please stay tuned! :-)

 

John

Search Airheads
Showing results for 
Search instead for 
Did you mean: