01-06-2014 10:12 PM - edited 01-06-2014 10:57 PM
This is my first tutorial for the contest, and its about AP Provisioning via GUI for Aruba Controller
1. From you aruba controller GUI interface let's navigate to Configuration>Wireless>AP Installation.
2. Select you AP and click on Provision.
3.Change the following settings:
a) Select the AP group from dropdown.
b) Put a check in the box next to Remove FQLN.
c) Chage the AP name , under AP List
d) Apply and Reboot.
Note: Give your AP a few minutes to reboot then ensure that your SSID is being broadcast by your AP.