Wireless Access

last person joined: 15 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

US regulatory domain

This thread has been viewed 7 times

  • 1.  US regulatory domain

    Posted Nov 29, 2016 01:24 AM

    Hi

     

    I had Controller-US but Access point is RW.

    After I provisioned access point. There's E flag shown on ap installation dashboard. SSID don't come up!

     

    How I solve this problem?

     

     



  • 2.  RE: US regulatory domain
    Best Answer

    EMPLOYEE
    Posted Nov 29, 2016 05:09 AM
    If you have an instant AP that starts of as RW, if you convert it, it will not work with a US controller.


  • 3.  RE: US regulatory domain

    Posted Nov 29, 2016 09:22 PM

    What's about AP (not instant AP)?. It must be AP-RW or AP-US or not

     

    Thanks, 



  • 4.  RE: US regulatory domain

    EMPLOYEE
    Posted Nov 29, 2016 09:40 PM

    Only instant APs have regulatory domain SKUs (jp, rw, us).  Campus-based APs do not have regulatory domains because they inherit the regulatory domain of the controller they are connected to.  The exception is that if you convert an IAP to a campus AP, it will keep the jp,rw or us designation, which is the problem you are running into.



  • 5.  RE: US regulatory domain

    Posted Nov 29, 2016 10:58 PM

    Great answer! I'm clear.

     

    Thank you