Wireless Access

Reply
Frequent Contributor I

US regulatory domain

Hi

 

I had Controller-US but Access point is RW.

After I provisioned access point. There's E flag shown on ap installation dashboard. SSID don't come up!

 

How I solve this problem?

 

 

Guru Elite

Re: US regulatory domain

If you have an instant AP that starts of as RW, if you convert it, it will not work with a US controller.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I

Re: US regulatory domain

What's about AP (not instant AP)?. It must be AP-RW or AP-US or not

 

Thanks, 

Guru Elite

Re: US regulatory domain

Only instant APs have regulatory domain SKUs (jp, rw, us).  Campus-based APs do not have regulatory domains because they inherit the regulatory domain of the controller they are connected to.  The exception is that if you convert an IAP to a campus AP, it will keep the jp,rw or us designation, which is the problem you are running into.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I

Re: US regulatory domain

Great answer! I'm clear.

 

Thank you

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: