Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

USB Parameters for K4203

This thread has been viewed 0 times

  • 1.  USB Parameters for K4203

    Posted Oct 20, 2014 03:47 AM

    Hi everyone, any know the USB parameters (USB Device Identifier, USB Dial String and USB mode switch) for the following 3G modem: Huawei K4203?

    I need them for RAP3 deployment.

     

    Thanks,

    Gian



  • 2.  RE: USB Parameters for K4203

    Posted Oct 20, 2014 07:48 AM

    The Huawei 4203 is not currently supported.   Please visit the following page for supported devices:

     

    http://www.arubanetworks.com/support-services/interoperability/#3GEVDOUSBModemsforRemoteAccessPoints

     

    If your up for it, you could try the parameters for the E3276; but the device is not on the supported list:

     

    http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/USB-Parameters-Huawei-E3276-RAP-155-ArubaOS-6-4-0-3/m-p/167012#M35494



  • 3.  RE: USB Parameters for K4203

    Posted Oct 20, 2014 10:33 AM

    Thanks Clembo for your quickly reply.

     

    In your link I see that the ArubaOS is 6.4... in my scenario the Aruba OS is 6.3.1.1.

    I have tried but it doesn't work.

     

    Could the upgrade help me?

    Thanks

     

    Gian



  • 4.  RE: USB Parameters for K4203

    Posted Oct 20, 2014 05:50 PM

    I can't say for sure....as I first mentioned, that device is not supported in any version right now by Aruba.  I only suggested the second option as something to try.