Wireless Access

Reply
New Contributor
Posts: 1
Registered: ‎11-23-2016

Unable to join AP to cluster/master

Hi,

 

I am trying to deploy 3 AP-205. I have set one up successfully, but unable to adde the two other to the network/cluster.

When I connect the AP it boots up, but both the 2,4Ghz and 5Ghz light stays amber. It does not join the the master AP in building a cluster.

 

They are connected to a switch whose ports are configured with the following VLAN-setup:

 

ports 3-6: vlan 10 untagged, vlan 20 tagged

I have a suspicion it is the vlan-setup that is causing problmes...

 

I have attached the config-file and ap-log from the running AP (master).

 

It looks as if the second AP does *something*, because I am not able to log into the instant-ui with the standard password, and it does not set up the "instant"-wifi-network

Guru Elite
Posts: 20,820
Registered: ‎03-29-2007

Re: Unable to join AP to cluster/master

We need the "show log system" from the APs that are not booting up to understand what could be going wrong.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: