Wireless Access

Reply
Occasional Contributor II

Upgrade from 6.4.3.4 to 6.5.1.10 - AMON question

Hello all,

 

I need to upgrade an ARUBA 7210 controller from 6.4.3.4 to 6.5.1.10. I see in the release notes this note :

When upgrading from an existing ArubaOS 6.4.x release, it is required to set AMON packet size manually to a desired value. However, the packet size is increased to 32K by default for fresh installations of ArubaOS 6.4.3.9.

 

So I've make research and I find this :

https://community.arubanetworks.com/t5/tkb/articleprintpage/tkb-id/ControllerBasedWLANs/article-id/2289

 

So I've got two questions :

  • I understand I need to size manually the packet size for AMON, I need to do this before or after the upgrade ?
  • The note explain the packet size is 32k. The new size (in bytes) is 32768 ? Or 32000 ?

Thanks for your help !

 

Regards

 

Guru Elite

Re: Upgrade from 6.4.3.4 to 6.5.1.10 - AMON question

Most people have to do nothing. That parameter is there for people who had fire walls between the controller and airwave that could not pass packets that size. If you don't have a firewall between your controller & Airwaves you most likely have nothing to do.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Occasional Contributor II

Re: Upgrade from 6.4.3.4 to 6.5.1.10 - AMON question

Thank you very much for your response !

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: