Wireless Access

Reply
Occasional Contributor I

Upgrading a 7200 Cluster Firmware

Hi Everyone,

I have a cluster of two 7200 controllers ina active/passive currently running 6.4.3.9.

what is the best way to upgrade

1. install firmware on master and reboot

2. install Firmware in local reboot 

?

 

and second q. is going from 6.4.3.9 to 6.5.0.3 ok

is there a upgrade matrix i.e before going to 6.5.x.x you must be on 6.4.x.x

Guru Elite

Re: Upgrading a 7200 Cluster Firmware

You can upgrade to/from those firmwares with no issue.

 

Upload the file to both and then reboot at the same time.  Make sure you do a "backup flash" on both controllers before you reboot, just in case you have to revert...

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
New Member

Re: Upgrading a 7200 Cluster Firmware

I think it would loss connectivity if rebooting both controller at the same time, right?


#AirheadsMobile
Guru Elite

Re: Upgrading a 7200 Cluster Firmware

Yes.  You need an upgrade Window.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: