Wireless Access

Reply
Occasional Contributor II
Posts: 57
Registered: ‎04-01-2010

Upgrading to 7200 controllers

Hi all,

 

We currently are running a 3200 as the master controller and 2-M3s as the local controllers.  We would like to replace the M3s with the 7200s.  We would like to leave the 3200 as the master.  Will the configuration be pushed fine from the 3200 to the 7200s?  What code version should be be on to make this as seemless as possible?  We are on 6.3.1.3 code currently.  Any insight is appreciated.

 

Thanks,

 

Bill

Guru Elite
Posts: 8,648
Registered: ‎09-08-2010

Re: Upgrading to 7200 controllers

Are they 3200XMs?

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 57
Registered: ‎04-01-2010

Re: Upgrading to 7200 controllers

Aruba3200-US 

Guru Elite
Posts: 8,648
Registered: ‎09-08-2010

Re: Upgrading to 7200 controllers

Yes, as long as all of the controllers are on the same code, the config will be pushed down.

 

All of the next generation firewall features (AppRF 2.0) can be configured on the legacy master but the actual feature sets will only apply where traffic is terminated (locals). Keep that in mind if you're planning on any fail over to the master. For example, while DPI policies can be configured on the 3200, those policies will not be applied if APs fail over to that controller. 

 

The latest 6.3 build or 6.4.0.3 should be done. 


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: