Wireless Access

Reply
Contributor II
Posts: 54
Registered: ‎11-24-2014

Use VLAN name for split-tunnel vap

Fellow Airheads,

 

I am trying to clean up my RAP configs and currently I have a separate ap-group for each one of ten VLANs. I would like to create a VLAN pool to simplify things down to one ap-group and use a VLAN name so I can re-use configs on multiple local controllers.

 

I know that the VLAN name even assignment is limited to tunnel and decrypt-tunnel modes. However, can I still use the hash algorithm and assign a VLAN name to a pool to be used in a split tunnel VAP or wired port profile? 

 

Thanks!

MVP
Posts: 4,301
Registered: ‎07-20-2011

Re: Use VLAN name for split-tunnel vap

VLAN pool or Name VLAN are not supported in Split-tunnel mode
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor II
Posts: 54
Registered: ‎11-24-2014

Re: Use VLAN name for split-tunnel vap

Ok thanks!

Search Airheads
Showing results for 
Search instead for 
Did you mean: