Wireless Access

Reply
Contributor I

Use local branchs DHCP server

Hi, I have a question about using Aruba equipement at distributed envirement.

I have controller at headquarter and RAPs at branchs.

So, does anyone know, is it possible to assign clients IP addresses from branchs' local DHCP server?

Guru Elite

Re: Use local branchs DHCP server

If the RAPs are in bridge mode, they will use local DHCP.

Sent from Nine

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Guru Elite

Re: Use local branchs DHCP server


YuriyBozhko wrote:

Hi, I have a question about using Aruba equipement at distributed envirement.

I have controller at headquarter and RAPs at branchs.

So, does anyone know, is it possible to assign clients IP addresses from branchs' local DHCP server?


That would be a bridged SSID:  http://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Web_Help_Index.htm#ArubaFrameStyles/Remote_AP/Bridge.htm



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I

Re: Use local branchs DHCP server

Wow, so fast))
Thank you, cappalli...
It that I was needed...
As far, as I understand, I'll have centralized control..

Guru Elite

Re: Use local branchs DHCP server

Traffic will be forwarded locally at the branch and will not be tunneled centrally.

Sent from Nine

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II

Re: Use local branchs DHCP server

Hi Colin,

 

I need your advise, I have environtment like bellow IEB.JPG

 

AP at Branch Office is not RAPs. So, Can i get DHCP From Local Branch Office ?? What should i do on My Controller and environments ?

 

Kindly need your advise

 

Thanks

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: