Wireless Access

Reply
Occasional Contributor II
Posts: 11
Registered: ‎03-14-2012

Use other port than 443 for connecting RAP and VIA clients?

Hello,

 

we currently run a test-environment of Aruba. On our site we already have an VPN-solution to connect remote clients. Therefore port 443 of our static Internet IP will be forwarded to the VPN-router.

 

Now, we also want to test Aruba VPNs but can't do because they need 443 either. Is there a way to tell VIA and/or RAP3 to use any other port than 443 (maybe 80, which is currently not used, or any other port). I know that this may not work in foreign environment of hotels or such, but this is not a problem for now.

 

Guru Elite
Posts: 21,267
Registered: ‎03-29-2007

Re: Use other port than 443 for connecting RAP and VIA clients?

At this time, it cannot be changed, unfortunately.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Aruba Employee
Posts: 117
Registered: ‎09-21-2010

Re: Use other port than 443 for connecting RAP and VIA clients?

[ Edited ]

As colin said, you can't change this. But only VIA requires 443. RAPs do not use 443, they only require UDP 4500.

 

Regards,

Sathya

Search Airheads
Showing results for 
Search instead for 
Did you mean: