Wireless Access

Reply
Occasional Contributor I
Posts: 5
Registered: ‎05-20-2014

Username of the connected clients not shown in controller

Aruba controller not showing username of the connected controller? Any idea?

 

Controller details as below:

 

Model : Aruba3600

Version : 6.3.1.0

 

Aruba
Posts: 1,296
Registered: ‎08-29-2007

Re: Username of the connected clients not shown in controller

What is the authentication method?


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Occasional Contributor I
Posts: 5
Registered: ‎05-20-2014

Re: Username of the connected clients not shown in controller

Hi Michael,

 

It's using EAP-SIM as authentication method.

Guru Elite
Posts: 21,480
Registered: ‎03-29-2007

Re: Username of the connected clients not shown in controller

Can you please show us the output of "show user-table verbose"



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: Username of the connected clients not shown in controller

EAP-SIM usually will show the IMSI (International Mobile Subscriber Identifier) to identify the device; not a username.    The IMSI is a string made up of a few items (Mobile Country Code, Mobile Network Code, and the Mobile Subscriber Identification Number).  

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Search Airheads
Showing results for 
Search instead for 
Did you mean: