Wireless Access

Reply
New Contributor

Users are getting delay in getting IP address and some time they dont get IP address.

Hi,

Please see the following issue and suggest.

vlan 2,3 and 11 are created and running Hash VLAN algorithm.

Users are getting delay in getting IP address and some time they dont get IP address.

Below is the log on controller:
<DBUG> |dhcpd| parse_option_buffer: malformed option dhcp.netbios-node-type (code 46): option length exceeds option buffer length.

 

Regards,
Kumara BGN

Guru Elite

Re: Users are getting delay in getting IP address and some time they dont get IP address.

You should make sure that in your user role there is an ACL like:

 

any any service svc-dhcp permit



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: Users are getting delay in getting IP address and some time they dont get IP address.

Kumara,

 

Please check this Validated Reference Design document about the possibilities of using a single VLAN instead of VLAN pooling: http://community.arubanetworks.com/t5/Validated-Reference-Design/Single-VLAN-Architecture-for-WLAN/ta-p/257196

 

In many cases VLAN pooling is the less desirable solution.One exception is when you cannot get a single block of IP addresses for your wireless clients.

 

Herman

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
New Contributor

Re: Users are getting delay in getting IP address and some time they dont get IP address.

Thanks Joseph

New Contributor

Re: Users are getting delay in getting IP address and some time they dont get IP address.

Thanks Herman..

 

I have applied  Even pooling method in VLAN pooling on the controller to check the user connectivity.

 

Today users are checking for the connectivity.

 

Regards,

Kumara BGN

New Contributor

Re: Users are getting delay in getting IP address and some time they dont get IP address.

Hi Joseph,

 

I have applied  Even pooling method in VLAN pooling on the controller to check the user connectivity.

 

Today users are checking the connectivity.

 

Regards,

Kumara BGN

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: