Wireless Access

Reply
Regular Contributor I

Using openssl for windows as CA to generate certificate for dot1x terminiation in controller

Hi, 

 I will generate the CSR from the controller. I have installed openssl for windows(gnuwin32). I want to use that as a Certificate authority and generate a certificate for dot1x termination on the controller. How to do it??

Aruba Employee

Re: Using openssl for windows as CA to generate certificate for dot1x terminiation in controller

This might help you. 

 

http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-can-I-use-OpenSSL-to-create-CA-server-and-public/ta-p/179206

Vinod Kumaar AVM ACMX, ACDX
Principal Network Engineer
Customer Advocacy | Aruba Networks Inc.

Did something you read in the Community solve a problem for you? If so, click "Accept as Solution" in the bottom right hand corner of the post.
Regular Contributor I

Re: Using openssl for windows as CA to generate certificate for dot1x terminiation in controller

@Vinod, I checked that article. it appears the article is based on openssl on linux. 

 

Please help me on getting a server certificate from openssl installed on windows8. I downloaded and installed gnuwin32 in my PC. 

Guru Elite

Re: Using openssl for windows as CA to generate certificate for dot1x terminiation in controller

If you do a search for "open ssl windows" there are quite a few articles that say how to do this on Windows:

 

https://blog.didierstevens.com/2015/03/30/howto-make-your-own-cert-with-openssl-on-windows/



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: