Wireless Access

Reply
Contributor I

VIA Enablement

Am I right in thinking that each controller must be licensed individually to use VIA i.e. I need a PEFV license for all my controllers, regardless of centralised licensing?

 

Once enabled I am able to connect upto the amount specified for the "VPN Server Module" amount?

Aruba

Re: VIA Enablement

Correct, PEFV is not included in the centralized licensing setup.  You'll need PEFV on any controllers that will terminate VIA clients.    Once installed, the limit is based upon the number of IPsec tunnels the controller can support.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Aruba

Re: VIA Enablement

...also, if you plan on using HTTPS failback for VIA, those connections will consume 2 IPsec connections, so consider that in your maxium connection support per controller.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Contributor I

Re: VIA Enablement

Perfect thank you

Aruba

Re: VIA Enablement

One more thing; if you run master/local topology, the master will also need PEFV on it to enable the VIA profiles (even if the controller will not terminate VIA clients).

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Contributor I

Re: VIA Enablement

We're running Master/Standby. I assume I still need two licenses in the event the master changes?

Aruba

Re: VIA Enablement

Yes; each controller in that case would need the license.  

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: