Wireless Access

Reply
Frequent Contributor I
Posts: 247
Registered: ‎09-14-2011

VIA and VPN Address Pools

I have VIA working well in a simple capacity (meaning no ClearPass right now though that may be coming in the future for this particular instance) and I am adding a second VPN profile. I would like this secondary VPN profile to use a different VPN address poll. I have two pools configured on the VPN services page of the controller but I cannot figure out how to get the secondary VPN profile to use the secondary address pool.

 

Any suggestions?

 

 

Scott McNeil - IT Specialist, Global Process Automation
Network+ | CWNA | CWTS | ACSP | ACMP | ACMA | BREC
MVP
Posts: 4,272
Registered: ‎07-20-2011

Re: VIA and VPN Address Pools

You need to point the profile to a new user-role and under the user-role add the new Pool

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Frequent Contributor I
Posts: 247
Registered: ‎09-14-2011

Re: VIA and VPN Address Pools

Hey VF, so would that be the L2TP Pool? or will Role VLAN ID and then VIA Connection Profile do the trick? Or a combination of all of the above?

 

 

Scott McNeil - IT Specialist, Global Process Automation
Network+ | CWNA | CWTS | ACSP | ACMP | ACMA | BREC
MVP
Posts: 4,272
Registered: ‎07-20-2011

Re: VIA and VPN Address Pools

VIA Auth Profile > Role > L2TP (VIA POOL)
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: