Wireless Access

Reply
Occasional Contributor II
Posts: 20
Registered: ‎02-25-2012

VLAN propagation in remote office via RAP-3WN

Hi,

 

I have Aruba 620 controller in HO. I have RAP-3WN for my remote office. I have 5 VLAN's configured in the controller with role based access. I want the same VLAN's to propagate to my remote office via the RAP-3WN.Please suggest me the configuration. And do I need to have switches which allows vlan creation in the remote office. The users in the remote office LAN are wired.

MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: VLAN propagation in remote office via RAP-3WN

 

Do you want/need the wired users to be authenticated or no ?

 

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 20
Registered: ‎02-25-2012

Re: VLAN propagation in remote office via RAP-3WN

if possible yes.

 

the reason why i want the vlan's to propagate is to retain the security rules for the remote users when they access the DC resources. Further based on the vlan,role i can set policer in the rap-3wn to control bandwidth usage. I would also want the users to be  monitor from the controller dashboard. 

MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: VLAN propagation in remote office via RAP-3WN

 

Do the following :

 

1- Uncheck the trusted so this way the user has to authenticate (Make sure you use anything but ethernet interface 0 , this is use for the uplink)  , then you can assign the VLANs in there as well.

 

AP Group - Google Chrome_2013-06-26_14-57-19.png

 

2- And then assign the aaa profile you want to use to authenticate the user against 

 

AP Group - Google Chrome_2013-06-26_14-51-54.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: