Wireless Access

Reply
DNe
Contributor II
Posts: 38
Registered: ‎07-06-2015

VPN S2S Tunnel Question

[ Edited ]

Hi together,

i have to ask some details about this ASE

 

ASE s2s Tunnel

 

My Task is to configure a active (live) controller so i have to be sure what iam doing :-)

 

We have a moving 7005 with dyn Internet IP and i want to connect that controller with VPN to our corporate.

 

So the ASE is fine but i am not really happy about the explanation of src-net %dyn_src_network% %dyn_src_mask%
dst-net %dyn_dst_network% %dyn_dst_mask%

 

Also the guide didnt explain the meaning.

 

So in my case for Example lets say i have a 192.168.0.0/24 on my moving controller. And f.e. on the static VPN "Hub" i have a 10.0.0.0/16 and one 172.16.0.0/24.

Goal is reached when 10.0.0.0/16 and 172.16.0.0/24 can reach the 192.168.0.0/24 and vice versa.

 

What do i need here as src and dst-net on the hub and on the moving.

 

I only know the cisco method with ACLs and tunnel IFs so maybe thats the cause why i am a little bit confused :-)

 

Thanks in advance for a explanation!

ACMP
DNe
Contributor II
Posts: 38
Registered: ‎07-06-2015

Re: VPN S2S Tunnel Question

[ Edited ]

Any suggestions?

ACMP
DNe
Contributor II
Posts: 38
Registered: ‎07-06-2015

Re: VPN S2S Tunnel Question

Answer:

src-net %dyn_src_network% %dyn_src_mask%
dst-net %dyn_dst_network% %dyn_dst_mask%

 

This is really the "ACL" which Network Adresses can use the tunnel to which destinations. Currently i don't know why you also can add a route ACL on top.

 

ACMP
Search Airheads
Showing results for 
Search instead for 
Did you mean: