Wireless Access

Reply
Occasional Contributor II
Posts: 14
Registered: ‎12-13-2012

VPN setup on 7210 for windows vpn client

I am looking to create a basic vpn for remote access into the network.  I would like to use just the standard windows vpn setup.  Is this possible and if so anybody have a setup or things to check?

 

I have setup the l2tp, added a user, installed perfv license and I am stil unable to connect from the outide.  Any help would be greatly appreciated.

Aruba
Posts: 1,377
Registered: ‎12-12-2011

Re: VPN setup on 7210 for windows vpn client

see this document.  You should download the VIA client as well for Windows.  I don't think the internal one is supported.

 

It's also much better :)

 

http://www.arubanetworks.com/wp-content/uploads/VIAAppNote_2012-06-11.pdf

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Occasional Contributor II
Posts: 14
Registered: ‎12-13-2012

Re: VPN setup on 7210 for windows vpn client

Ah ha, I was working on that as you wrote this, I get connected, well it allows me to download profile, but it shows

 

"VIA virtual adapter could not be enabled"

 

Any thoughts on this?

Aruba
Posts: 1,377
Registered: ‎12-12-2011

Re: VPN setup on 7210 for windows vpn client

Do you have the VIA client installed? What does your config look like. Did you follow the VRD doc?
Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
Showing results for 
Search instead for 
Did you mean: