Wireless Access

Reply
MVP
Posts: 1,409
Registered: ‎05-28-2008

VPN to controller as a client | Need to pass traffic to local vlans behind controller

Hi Guys

I was able to establish VPN l2TP from my laptop to a controller and get the right acl i gave to myself.

But even due that i got allowall...it's seems that i cant go to internal VLANS that are located on the controller itself.

What do i missing here? routing srcnatting? Please advise.

 

Thanks Me

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Guru Elite
Posts: 21,269
Registered: ‎03-29-2007

Re: VPN to controller as a client | Need to pass traffic to local vlans behind controller

You last rule should be any any any src-nat

Unless your ipsec pool is in a dinner on a routable interface on the controller you need to source NAT your traffic.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite
Posts: 8,637
Registered: ‎09-08-2010

Re: VPN to controller as a client | Need to pass traffic to local vlans behind controller

[ Edited ]
(removed)

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: