Wireless Access

Regular Contributor I
Posts: 187
Registered: ‎03-27-2013

VRRP change Virtual IP

[ Edited ]

Hi gyus,

i have a problem.


I have configured VRRP with the master redundancy between my two controllers.

Now i have to change the IP address and VLAN interface of VRRP.


but when i try to change it i receive an error because the virtual IP is the master IP and so i cannot do any change.


can you explain me how i can remove the VRRP so i can reconfigure it?


thanks in advance.

Kind regrards



Guru Elite
Posts: 20,821
Registered: ‎03-29-2007

Re: VVRP change Virtual IP

You need to disable the master redundancy first. Disable it on the backup, then disable it on the master. You should be able to drop the VRRP after that.

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: VRRP change Virtual IP



We can not modify the configuration when it is having the dependency. here Master redundancy is depended on VRRP hence you are not able to alter the VRRP configuration.


break the master redundancy from both the controllers.


for ref :


standby : 



(config-master-redundancy)#no master-vrrp

(config-master-redundancy)#no peer-ip-address


Repeat the same on the Master also. now you should be able to change the VIP.


Please feel free for any further help on this.


Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Regular Contributor I
Posts: 187
Registered: ‎03-27-2013

Re: VVRP change Virtual IP

Hi, thanks! i have solved with yours suggestion. kind regards Andrea
Search Airheads
Showing results for 
Search instead for 
Did you mean: