Wireless Access

last person joined: 11 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Version 6.1.3.0

This thread has been viewed 0 times

  • 1.  Version 6.1.3.0

    Posted Feb 15, 2012 11:04 AM

    Just curious to see if anyone has installed version 6.1.3.0 and if any problems have shown up.  I was thinking of going to the version over Spring Break.

     

    Thanks,

    Jeff



  • 2.  RE: Version 6.1.3.0

    EMPLOYEE
    Posted Feb 15, 2012 11:14 AM

    From what I have heard, it has been pretty stable. However, I'm sure 6.1.3.1 will be out soon, which usually includes some bug fixes. When is your spring break?



  • 3.  RE: Version 6.1.3.0

    Posted Feb 15, 2012 11:15 AM

    March 6th - 10th, which might be enough time for a bug fix to be released.



  • 4.  RE: Version 6.1.3.0

    EMPLOYEE
    Posted Feb 15, 2012 11:45 AM
    @jebowman wrote:

    March 6th - 10th, which might be enough time for a bug fix to be released.

    True.



  • 5.  RE: Version 6.1.3.0

    Posted Feb 15, 2012 01:03 PM

    I was on the beta and it went really well.  It's a stable release, but I will be waiting for 6.1.3.1 as there is one particular bug I need fixed releated to the RAPs.  That bug is actually in the 6.1.2.x release I'm running now, so it wouldn't hurt me to go to 6.1.3.0, but I'll just wait since 6.1.3.1 is just around the corner.



  • 6.  RE: Version 6.1.3.0

    Posted Mar 14, 2012 09:32 AM

    I'm upgrding next week, I'm currently runing 6.1.0.0 and was going to upgrade to 6.1.2.8.

     

    I want to take advantage of 6.1.3.0 features but not looking forward to install another .0 release



  • 7.  RE: Version 6.1.3.0

    EMPLOYEE
    Posted Mar 14, 2012 10:05 AM
    @opers13 wrote:

    I'm upgrding next week, I'm currently runing 6.1.0.0 and was going to upgrade to 6.1.2.8.

     

    I want to take advantage of 6.1.3.0 features but not looking forward to install another .0 release

    Opers13,

     

    It depends on what services you are running.  You should only upgrade to 6.1.3.0 if you need:

     

    - Support for the AP93H

    - Support for the Verizon 4G UML290 Card

    - Support for the AP104

    - Support for IPV6 Router Advertisements

    - Support for Radius Accounting for Split-tunneled Remote AP clients

    - Support for heartbeats in L2 GRE tunnels

    - Support for Even VLAN Pool Assignments

    - Support for QOS for VMWARE and Citrix ICA applications

    - Support for prioritization for Skinny (Cisco VOIP protocol) version 17 or greater

    - Support for wired 802.1x supplicant on an access point

    - Support for the VIA client on iPads and iPhones

     

    You should NOT upgrade to 6.1.3.0 yet if you are :

     

    - Running ESI

    - Suppressing broadcasts on wired RAP interfaces using broadcast-multicast optimization on a wired VLAN (Fixed in 6.1.2.8), soon to be fixed in 6.1.3.1.

     

    Ultimately, you should contact support for up to date visibility of what to upgrade to based on what services you are running at this time.

     

     



  • 8.  RE: Version 6.1.3.0

    Posted Mar 14, 2012 10:11 AM

    I wanted to take advantage of AP-105s running in hybrid mode (spectrum analysis)



  • 9.  RE: Version 6.1.3.0

    EMPLOYEE
    Posted Mar 14, 2012 10:48 AM

    Okay.  I would wait until 6.1.3.1, if you can.

     



  • 10.  RE: Version 6.1.3.0

    Posted Mar 14, 2012 11:42 AM

    6.1.3.1 should be out any day.



  • 11.  RE: Version 6.1.3.0

    Posted Mar 15, 2012 01:24 PM

    FYI...

     

    6.1.3.1 has been released and posted on the support site.