Wireless Access

Reply
MVP
Posts: 113
Registered: ‎01-27-2016

View default WMM to DSCP mappings

Is there a command to view the default mappings?

Guru Elite
Posts: 21,556
Registered: ‎03-29-2007

Re: View default WMM to DSCP mappings

http://community.arubanetworks.com/t5/Controller-Based-WLANs/What-are-the-default-DSCP-WMM-mapping-values-on-Aruba-WLAN/ta-p/175268



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

MVP
Posts: 113
Registered: ‎01-27-2016

Re: View default WMM to DSCP mappings

Since that article is several years old, I wanted to confirm that it is still valid and that values have not changed in later releases. Thanks for confirming. 

Guru Elite
Posts: 21,556
Registered: ‎03-29-2007

Re: View default WMM to DSCP mappings

You can confirm that by typing "show datapath session table <ip address of phone>" or you can set your own WMM to DSCP mapping in the SSID profile.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: