Wireless Access

Reply
New Contributor

VisualRF Plan measurements

I am attempting to do a wireless estimate for a warehouse client who could not provide a floor plan. I measured the buildng and drew one up to scale. Once I imported the .jpg image into VisualRF Plan 8 I set boundries and used the measurement tool on the exterior walls.

 

The problem is that no matter how many times I measured to 70.10m X 17.64m the measurements in the properites do not come close. Is there something I am missing? Is there a way to manually set measurements? I would prefer that square meters on the building NOT be several hundred meters off.

New Contributor

Re: VisualRF Plan measurements

Forgive me. The dimensions of the building are 69.75m x 168.75m.

Re: VisualRF Plan measurements

http://community.arubanetworks.com/t5/Network-Management/VisualRF-resize-problem/m-p/290410#M6371

 

Check this community link, which I posted couple of days back.

 

Regards,

Pavan

 

 

Regards,
Pavan
If my post address your queries, give kudos and accept as solution!
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: