Wireless Access

last person joined: 20 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

WLC software upgrade - AP does not register.

This thread has been viewed 2 times
  • 1.  WLC software upgrade - AP does not register.

    Posted Mar 22, 2018 01:43 AM
      |   view attached

    Hi guys,

     

    I'm trying to update WLC 7010 Master from 8.0.0.0 to 8.0.1.1 (and as a final step move to 8.2.0.x)

     

    8.0.0.0 - AP point registration works fine
    8.0.1.1 - AP does not register (8.2.0.x -the same issue)

     

    AP ip = 10.30.100.125
    WLC VIP = 10.30.100.124

     

    Packets coming into WLC:
    (WLC2) [mynode] #show datapath session | i 10.30.100.125
    10.30.100.124 10.30.100.125 17 8211 8211 0/0 0 0 0 pc0 1 0 0 FYI
    10.30.100.125 10.30.100.124 17 8211 8222 1/0 0 0 0 pc0 1 0 0 FYCI

     

    What I grabbed from wireshark: when AP establishes GRE tunnel controller responds with ICMP unreachable (276-277 packets).

     

    Syslog:

    AP 9c:1c:12:c1:c2:8a. MM doesn't support AP redirect or termination 

     

    Could it be causer that this WLC was a backup master before and I moved it to a separate vlan and wlc currebtly has no licence?

     

    Do you have any any idea what the issue can be?

     

    Cheers,
    Alex.

     



  • 2.  RE: WLC software upgrade - AP does not register.

    Posted Mar 22, 2018 01:58 AM