Wireless Access

Reply
Frequent Contributor I

WPA2-PSK Blacklisting issue

I created a WPS2-PSK network with Blacklisting disabled, all works fine.

If I enabled Blacklisting and set the max authentication failures to 5, clients can not connect anymore.

 

Plus it doesnot seem like the value I put in to max authentication failures is saved. It always reverts back to 0 which is default value.

 

Screenshot is attached.

1.PNG

 

I am using Airwave 8.0.6.1 managing the Aruba VC(version 6.4.2.3). Please advise.

Guru Elite

Re: WPA2-PSK Blacklisting issue

WPA2-Personal does not have authentication, so there is nothing to blacklist.  Are you doing mac authentication on top of that?

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Frequent Contributor I

Re: WPA2-PSK Blacklisting issue

I am planning to do mac authentication...I think it make sense after you mentioned that:)

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: