Wireless Access

Reply
Contributor I
Posts: 48
Registered: ‎01-19-2012

Want to assign IPs from Controller

Hi,

I am new to MSR2000, i want to configure my MSR2000 that vlan created in MSR2000 can get ip from Aruba Controller's VLAN.

Controller VLAN address is 192.168.40.1

 

1st the default vlan 1 created in MSR and when i connect cotroller to MSR port and trying to connect with MSR BSSID i got access to controller after that.

 

2nd i created Vlan 40 in my MSR1and in IPV4 tab i used only DHCP relay option 82 and uses Controllers Van ip 192.168.40.1,

now going to BSS and created new id named TEST on radio 0 bss 6 and in IPV4 tab i inserted ip 192.168.40.1 in dhcp  rely option 82.

 

When i connected to BSS "Test" not get any ip scheme form controller.

 

Please help me, regards,

Faisal

Moderator
Posts: 21
Registered: ‎03-07-2011

Re: Want to assign IPs from Controller

Faisal,

 

Have you added the BSS "TEST" into VLAN40 by setting access Vlan40 under the BSS?

 

The reason VLAN 1 works is because the BSS has been added into VLAN1 by default.

 

Best,

Xu

 

 

Contributor I
Posts: 48
Registered: ‎01-19-2012

Re: Want to assign IPs from Controller

Xu,

 

Thanks for reply, I already added BSS "TEST" in Vlan 40 by setting access Vlan40 under the BSS.

 

I copied same configuration of VLAN 1 to Vlan 40+ BSS .

Regards,

Faisal

Moderator
Posts: 21
Registered: ‎03-07-2011

Re: Want to assign IPs from Controller

Can you post the configuration?

 

Thanks,

Xu

 

Contributor I
Posts: 48
Registered: ‎01-19-2012

Re: Want to assign IPs from Controller

Hello,

All Config attached in docx format. please review and solve my porblem

Aruba Employee
Posts: 31
Registered: ‎11-19-2007

Re: Want to assign IPs from Controller

Faisal,

 

Can you ping the controller's IPs on VLAN 20 and 40 from the command line of MSR1 and MSR2?

Cheers!
Marcus Wehmeyer
Search Airheads
Showing results for 
Search instead for 
Did you mean: