Wireless Access

Reply
Occasional Contributor II
Posts: 24
Registered: ‎01-09-2015

WebCC - Possibility to use an offline database?

Dear Community,

 

In order to have WebCC working we need to:

  • Enable DPI & WebCC inside the Controller firewall and inside the user role.
  • Configure a DNS server on the controller
  • Ensure our controller can access aruba.brightcloud.com on port 443

Do you know if there is a possibility to download a database from aruba.brightcloud.com and upload it to the controller so the controller can work with WebCC without Internet access?

 

Thanks in advance for sharing your knowledge,

Best regards,

Guru Elite
Posts: 21,023
Registered: ‎03-29-2007

Re: WebCC - Possibility to use an offline database?

That is not possible, unfortunately...


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 24
Registered: ‎01-09-2015

Re: WebCC - Possibility to use an offline database?

[ Edited ]

Hello Colin,

 

Thanks again for your prompt answer.

We are going to open Internet access to our controller for having WebCC working, but we would like to restrict the access. Do you know if a specific IP range is used by aruba.brightcloud.com?

 

The idea is to authorize only a certain amount of IP addresses.

 

Best regards,

Search Airheads
Showing results for 
Search instead for 
Did you mean: