Hello!
Customer wants to know what the manufacturing date of the access point is. When Access point boots I get this snip through console:
APBoot 2.1.3.4 (build 56756)
Built: 2016-10-05 at 10:14:25
Model: AP-30x
DRAM: 512 MiB
Flash: Detected MX25R3235F: total 4 MiB
NAND: 128 MiB
PCIE0 link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0040 00002 00 00000004 00000000 00000000 00000000
Power: 802.3af POE
Net: eth0
Radio: qca9990#0, ipq4029#1
Reset: cold
FIPS: passed
From that I can determine the Built time, but to do a console to all APs is very time consuming. So I am wondering if there is a command I cen issue on controller, that can get me this info from AP? I tried show ap tech-support ap-name <ap-name> but I couldn't find this parameter.
Thanks in advance!
Daniel