I have the same issue...
My new ap 205 can't be viewer on my 3200 controller.
Checking image @ 0x1e100000
Copying image from 0x1e100000
Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
Uncompressing... done
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 6.4.2.6-4.1.1.13 (build 54918 / label #54918)
[ 0.000000] Built by p4build@rhodes on 2016-05-06 at 05:00:19 PDT (gcc version 4.7.2)
[ 0.000000]
[ 0.000000] Flash variant: variant0
[ 0.000000] MPCORE found at 19020000, SCTLR 0x10c53c7f ACTLR 0x00000040 CPSR 0x600001d3 SPSR 0xa7006200 PRRR 0x000a81a8 NMRR 0x40e040e0
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 117664k/117664k available, 13408k reserved, 0K highmem
[ 0.052000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 5.358000] PMU: registered new PMU device of type 0
[ 5.864000] pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
[ 5.866000] pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
[ 5.868000] pci 0001:01:00.0: BAR 0: set to [mem 0x08000000-0x08007fff 64bit] (PCI address [0x8000000-0x8007fff]
[ 6.372000] pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
[ 6.374000] pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
[ 6.376000] pci 0002:02:00.0: BAR 0: set to [mem 0x40000000-0x40007fff 64bit] (PCI address [0x40000000-0x40007fff]
[ 6.722000] i2c-springbank: using remapped base c8914060
[ 6.724000] mpcore_wdt mpcore_wdt: enabling watchdog.
[ 6.728000] qspi_iproc qspi_iproc.1: 1-lane output, 3-byte address
[ 6.730000] m25p80 spi1.0: mx25l25635e (32768 Kbytes)
[ 6.732000] Creating 1 MTD partitions on "spi1.0":
[ 6.734000] 0x000000000000-0x000002000000 : "qspi"
[ 6.736000]
[ 6.736000] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
[ 6.740000] Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
[ 6.754000] Starting Kernel DES KAT ...Completed Kernel DES KAT
[ 6.758000] Starting Kernel AES KAT ...Completed Kernel AES KAT
[ 6.760000]
Domain Name: instant.arubanetworks.com
No panic info available
apfcutil: sector CACHE: Cache uninitialized
apfcutil: sector RAP: Cache uninitialized
apfcutil: sector FAT: Cache uninitialized
apfcutil: sector SCRATCH: Cache uninitialized
Check backup ENV.
apfcutil: sector MESH Prov: Cache uninitialized
Cfg len is 0
Configuration file is empty, turning on default services...
extended ssid activate due to no AP config ...
[ 14.534000] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 16.538000] bond0: link up (100FD)
[ 16.540000] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
Mesh is DISABLED on this device.
Disabling wpa_supplicant for this paltform
[ 17.606000] AP xml model 81, num_radios 2 (jiffies 8803)
[ 17.608000] init_asap_mod: installation:0
[ 17.610000] radio 0: band 1 ant 0 max_ssid 16
[ 17.612000] radio 1: band 0 ant 0 max_ssid 16
[ 17.614000] election init: rand=16 HZ=500
[ 17.616000] IAP client match init
notify asap_mod 3g no present...
Starting watchdog process...
Getting an IP address...
Dec 31 16:00:19 udhcpc[1361]: udhcpc (v0.9.9-pre) started
Dec 31 16:00:19 udhcpc[1361]: send_discover: pkt num 0, secs 0
Dec 31 16:00:19 udhcpc[1361]: Sending discover...
Dec 31 16:00:19 udhcpc[1361]: send_selecting: pkt num 0, secs 0
Dec 31 16:00:19 udhcpc[1361]: Sending select for 172.16.6.57...
Dec 31 16:00:19 udhcpc[1361]: Lease of 172.16.6.57 obtained, lease time 691200
Dec 31 16:00:19 udhcpc[1361]: DHCP OPT 43 deleted airwave config
172.16.6.57 255.255.0.0 172.16.0.1
Compressing all files in the /etc/httpd directory...
[ 22.624000] ip_time_handler: Got ip and packets on bond0 Started master election 89-0, rand 24
Done.
Starting Webserver
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
bind: Transport endpoint is not connected
Launching NTP Client on pool.ntp.org
[ 24.622000] wifi0: AP type AP-205, radio 0, max_bssids 16
[ 24.666000] wifi1: AP type AP-205, radio 1, max_bssids 16
shutting down watchdog process (nanny will restart it)...
Completed SW FIPS KAT test
<<<<< Welcome to the Access Point >>>>>
User: [ 43.856000] process `snmpd_sap' is using obsolete setsockopt SO_BSDCOMPAT
[ 46.656000] i am master now
[ 46.658000] (00:00:48) !!! Init ---> Master
[ 46.660000] asap_send_elected_master: sent successfully.