Wireless Access

Reply
Frequent Contributor I
Posts: 178
Registered: ‎05-18-2011

Why can't find Multi Association on Virtual AP profile at 6.1.3.4

Why can't find the Multi Association on Virtual AP profile at version of 6.1.3.4? I have attach the screen capture.

Guru Elite
Posts: 21,028
Registered: ‎03-29-2007

Re: Why can't find Multi Association on Virtual AP profile at 6.1.3.4

It was removed in 6.1.3.2



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I
Posts: 178
Registered: ‎05-18-2011

Re: Why can't find Multi Association on Virtual AP profile at 6.1.3.4

On 6.1.3.4 have any other method to improve mobile client (such as laptop, tablet or smartphone) roaming experience, beside adjust the roaming aggresiveness on the laptop?

MVP
Posts: 500
Registered: ‎04-03-2007

Re: Why can't find Multi Association on Virtual AP profile at 6.1.3.4

Roaming decisions can me influenced by having a good RF design  with a sufficient amount of overlap between coverage cells. As a client moves towards the edge of its current AP's cell, there's a good chance the signal would fall below the clients threshold that would trigger it to seek out a new AP. With a good amount of overlap, the "next" AP's cell signal would be fairly strong, thus making it an obvious choice for roaming.

==========
Ryan Holland, ACDX #1 ACMX #1
The Ohio State University
Search Airheads
Showing results for 
Search instead for 
Did you mean: