Wireless Access

Reply
Aruba Employee
Posts: 6
Registered: ‎10-25-2012

Wireless AP CPU and Memory Triggers and Reports

I've been trying to use the memory and CPU utilization triggers and report for wireless access points.  It works great for the controller but doesn't seem to work for the APs.  AP - Procurve MSM422, Contoller - MSM760.  Is there a compatiblility issue?

 

Thanks

 

Moderator
Posts: 1,270
Registered: ‎10-16-2008

Re: Wireless AP CPU and Memory Triggers and Reports

Will try to get someone to replicate this with some devices in our lab.  Some devices do not provide CPU / Memory data for AMP to trigger against.  Will update with more info after testing.


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Aruba Employee
Posts: 4
Registered: ‎08-24-2012

Re: Wireless AP CPU and Memory Triggers and Reports

[ Edited ]

Memory and CPU Utilization reports and triggers can be generated only in the controller level.
We do have AP options in them but that is for FAT AP's and some iOS devices.

 

Thanks,

Jeyashree

Aruba Employee
Posts: 6
Registered: ‎10-25-2012

Re: Wireless AP CPU and Memory Triggers and Reports

Are you saying that if the AP was in standalone mode, Airwave would be able to do CPU and memory triggers?

Thanks
Aruba Employee
Posts: 4
Registered: ‎08-24-2012

Re: Wireless AP CPU and Memory Triggers and Reports

Yes exactly. We dont get these statistics from thin ap's and so we cannot generate alerts or reports.

 

Thansk,

Jeyashree

Search Airheads
Showing results for 
Search instead for 
Did you mean: