Wireless Access

Reply
Frequent Contributor II

Wireless client could not print from colubris/hp bridge

Hi,

 

We have Aruba 7210 controller with 6.5.3 AOS. here are 25 quantity AP 325 setup.

 

In our setup colubris and hp wireless bridges connected on wireless network, there are small printers are connected using serial port on bridges.

While wireless client trying to send print command printer could not print at the same time if i connected bridges on wired network wireless client are able to print. This setup was working fine before but today suddenly bridges stop printing over wireless network.

Please suggest how to fix it.

Frequent Contributor I

Re: Wireless client could not print from colubris/hp bridge

hi nik-mh, try going into the virtual-ap profile and disable "broadcast-filter arp", then bounce the client in and out of the network once. 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: