Hi,
We have 7210 controller running 6.4.2.8 with AP-205 & AP 105 at multiple branches which are connected through MPLS & P2P network. Average users per AP=25
We have configured SSID as Employee(Bridge mode), printer, mobile, ipad(Tunnel mode) & Guest (Captive portal)
This setup is working fine from last 1.6 Year but suddenly we are geting latency for "g" client only. rest of client working fine. 95% client are using "g" adapter. there are 200 laptop added in last month.
I am facing this issue one of my branch. there are 3 floor. All floors covered by glass wall. On my floor there is 3 AP installed, as i see all three AP have same channel (11) for 2.4 radio. I have assigned static channel to all AP & tested the latetency. But sitll suddenly geting latency.
ARM log has been attached.
As per ATAC observation,
Overall, RF is not clean and prone to high interfernce which is the cause for the ping losses in g radio.
You may have to take actions in eliminating the interference by doing a site survey and identifying the interferening APS and remove them.
Please suggest any alternative to fix this issue.
Regards,
Nik...
#7210