Wireless Access

Reply
Occasional Contributor II

aruba controller in Master-local setup

Is there anyway to force all AP to move to Local controller without rebooting master controller?  I had all AP on local controller but we lost connectivity to local made all ap report to master.

Thank you

 

Guru Elite

Re: aruba controller in Master-local setup

Are you using VRRP or LMS?



- You can turn on VRRP preemption in the VRRP settings.

- You can turn on LMS preemption in the AP system profile.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II

Re: aruba controller in Master-local setup

I am using LMS.

I just turned on LMS preemption.

Guru Elite

Re: aruba controller in Master-local setup

Since it was turned on after the failover event, you may have to swap the LMS and Backup LMS IPs to trigger the failover, then switch them back.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II

Re: aruba controller in Master-local setup

worked.

Thank you

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: