Wireless Access

Reply
New Contributor

backup the RAP whitelist automatically

Recently experienced a lost of all configurations on my controllers and restored them with a backup taken from Infoblox netMRI. However, that didn't have the RAP whitelist in it. I use Airwave to monitor the network and it is running version 7.7.6 and the controllers are running version 6.2.1.3. How can I automate saving the RAP whitelist without adding any new software?

Guru Elite

Re: backup the RAP whitelist automatically

https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-1296



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor

Re: backup the RAP whitelist automatically

That doesn't give me the syntacs to set up "automatic" saving of the whiteless just allows me to do it manually. I want to have this accomplished automatically once a day.

Re: backup the RAP whitelist automatically

 

You could accomplish that using that same command that cjoseph suggested but you will need another application to execute that for you.

 

Here a post of how to run scheduled commands to a controller :

http://community.arubanetworks.com/t5/Command-of-the-Day/COTD-Automating-Aruba-Controller-Tasks-with-Kiwi-CatTools/m-p/1365/highlight/true#M92

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: